Terms of Technical Requirements for Power Generating Modules (D1)
Opening the possibility for windmills to connect to the transmission grid
Grid code D1 defines the technical requirements for producers connected to the transmission grid. The older grid code (vers. 1.0) covered hydro- and geothermal power plants which are larger than 7 MW.
The increased interest in the connection of wind turbines and smaller power plants (under 10 MW) to the transmission grid required a review of the older grid code.
The goal of the new grid code was to define the requirements for wind farms and power plants (larger than 1.5MW) connected to the transmission grid. The grid code has been adapted according to the ENTSO-E grid code and to Icelandic circumstances where applicable. Wind farms and smaller power producers can now connect to the transmission grid when the requirements have been met.
A new draft of the grid code was sent to the Ministry for confirmation once it had undergone a review process, including Landsnet’s reaction to customers comments it.
The grid code was published on the 1st of July 2018 after confirmation from the Ministry.
The grid code can be accessed here.
If you have any question please do not hesitate to contact us at email@example.com
Writing and consultation 
Review process of customers ended December 13th 2016
Review of comments, update of the grid code and the reaction to comments from customers finished in 2017.
The grid code was sent for an approval to the Ministery in the beginning of February 2018
Publication of version 2.0 of grid code D1 was on July 1st 2018